The ESA Gigabit PoE Injector is a compact, plug-and-play solution designed to power PoE-enabled devices over a single Ethernet cable, eliminating the need for dedicated AC power outlets at the device location. Featuring one Gigabit Data In port and one Gigabit Data/Power Out port, it seamlessly combines DC electrical power with network data for transmission up to 100 meters (328 feet). Delivering up to 30W of power, it is ideal for powering IP security cameras, wireless access points, VoIP phones, and IoT hardware.
1 × 10/100/1000 Mbps Gigabit Data In port (RJ45)
1 × 10/100/1000 Mbps Gigabit Data + Power Out port (RJ45)
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) compliant
Max output power up to 30W over standard Cat5e/Cat6 cables
Transmission distance up to 100 meters (328 ft)
Plug-and-play installation; no software or complex setup required
Intelligent auto-detection powers only IEEE 802.3af/at compliant devices to prevent damage to non-PoE equipment
Built-in short circuit, over-current, and over-voltage protection
Integrated wall-mount flanges for easy surface installation
LED indicators for Power and PoE active status
Internal AC power supply with standard detachable AC power cord included
1 × 10/100/1000 Mbps Gigabit Data In port (RJ45)
1 × 10/100/1000 Mbps Gigabit Data + Power Out port (RJ45)
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) compliant
Max output power up to 30W over standard Cat5e/Cat6 cables
Transmission distance up to 100 meters (328 ft)
Plug-and-play installation; no software or complex setup required
Intelligent auto-detection powers only IEEE 802.3af/at compliant devices to prevent damage to non-PoE equipment
Built-in short circuit, over-current, and over-voltage protection
Integrated wall-mount flanges for easy surface installation
LED indicators for Power and PoE active status
Internal AC power supply with standard detachable AC power cord included
| Device Type | Gigabit PoE / PoE+ Injector |
|---|---|
| Total Ports | 2 × Gigabit RJ45 Ports |
| Input Port | 1 × 10/100/1000 Mbps Data In (RJ45) |
| Output Port | 1 × 10/100/1000 Mbps Data + Power Out (RJ45) |
| PoE Standards | IEEE 802.3af / IEEE 802.3at |
| PoE Pin Assignment | 1/2 (+), 3/6 (-) or 4/5 (+), 7/8 (-) |
| Max Output Power | 30W |
| Output Voltage | 48V–52V DC |
| Certifications | CE, FCC, RoHS |
| Network Cable Type | UTP/STP Cat5e, Cat6, or higher |
| Transmission Range | Up to 100 meters (328 ft) |
| Input Power | AC 100–240V, 50/60Hz, 0.75A Max |
| Surge Protection | 4KV ESD / Differential Mode |
| Ideal Use Cases | IP Cameras, Wi-Fi Access Points, VoIP Phones, Network Bridges |
